Oliver,
I think that you may have tipped me off. Looking in the Cisco .class files
in /usr/OV/symbols/C they do not have the isCisco variable in the
definitions. I have added it - I am going to delete the device and
re-discover it to see what happens.
Thanks!
Brian
-----Original Message-----
From: Oliver Bruchhaeuser [mailto:oliver.bruchhaeuser@de.ibm.com]
Sent: Friday, February 08, 2002 8:48 AM
To: nv-l@lists.tivoli.com
Subject: Re: [nv-l] CiscoWorks Integration
Brian,
first try to find out if the field isCisco is already "imported" by
NetView:
ovobjprint -f | grep isCisco
If it is not yet in the database, execute:
/usr/OV/bin/ovw_fields
and rediscover your Cisco nodes.
The way NetView sets this field:
During discovery the OID of the device is read with SNMP.
NetView lookup /usr/OV/conf/C/oid_to_sym for this OID in order to assign
the symbol.
In the correspondening symbol file (found under /usr/OV/symbols/C/)
there is a definition for the capability: "isCisco = 1"
Kind regards
Oliver Bruchhaeuser
Tivoli NetView EMEA L2 Support
IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 -
55131 Mainz - Germany
Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email:
bruchhae@de.ibm.com
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
"Brian Green"
<brian.green@c To: "Netview Mailing List
\(E-mail\)" <nv-l@lists.tivoli.com>
gi.ca> cc:
Subject: [nv-l] CiscoWorks
Integration
08.02.2002
13:49
Please respond
to brian.green
Hi All,
I have a problem with the Netview - CiscoWorks integration, and I am
wondering if anyone else has seen this. I have NetView 7.1 installed, and
I loaded the CiscoView integration and the Netview71ServerAdapter.jar
through the nmic.sh script. When a new Cisco device is detected, the
variable isCisco is not being set to true in the NetView database.
Does anyone know whose responsibility it is to set this variable - NetView
or CiscoView? I am being told by support here in Canada that the variable
is set by CiscoView, but does that mean I have to re-run the integration
pack every time a new Cisco device is found? I thought that the whole
purpose of loading the pack is to enable NetView to recognize Cisco
elements automatically.
Thanks for any help,
Brian
Brian W. Green
Partner and Consultant
The CGI Group
275 Slater Street, 14th Floor
Ottawa, Ontario
K1P 5H9
(613)234-2155
brian.w.green@cgi.ca
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|