re,
I have seen this on an Solaris 7.1.1 Netview with some Patches installed -
i think it was PJ28510/IY00001
Reg,
Dietmar
*************************************************************
Dietmar Gaulhofer, IBM Österreich
Systems Engineer
ITS - Integrated Technology Services - Unit Austria
Email: Dietmar_Gaulhofer@at.ibm.com
Tel: +43/1/21145-2756
**************************************************************
bernard.baudoux@fortisbank.com on 22.05.2002 12:05:01
Please respond to bernard.baudoux@fortisbank.com
To: "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
cc:
Subject: RE: [nv-l] What does Cisco Works Buy Me?
Hello,
Thank you Dietmar and Jean-Michel for your answers.
I have installed the WebClient, and indeed Ciscoview is launched. The
problem is that I prefer to use the Web Explorer for the following reason:
you do not have to re-install stuff at each release. I have tried the
WebClient with Netview 7.1 and this works, but this WebClient 7.1 does not
work with server 7.11. So I install the Webclient from 7.11 and this one
does not work with server 7.1.
>From that, I understand the WebClient has to be re-installed at each server
version. That is a bit annoying and explains why I would prefer the
explorer as far as possible.
But this means this could be a client issue. Anyone aware of any patch
for this ???
Regards,
Bernard Baudoux,
Fortis Banque.
> -----Original Message-----
> From: Dietmar Gaulhofer [SMTP:DIETMAR_GAULHOFER@at.ibm.com]
> Sent: mercredi 22 mai 2002 11:27
> To: nv-l@lists.tivoli.com
> Subject: RE: [nv-l] What does Cisco Works Buy Me?
>
> Hi,
>
> I have seen the same "strange" behavior. This happend on 1 PC where the
> WEBClient was running as an applet. The other PC
> where the WebClient has been Installed the browser started up.
>
> Reg,
>
> *************************************************************
> Dietmar Gaulhofer, IBM > Österreich
> Systems Engineer
> ITS - Integrated Technology Services - Unit Austria
> Email: Dietmar_Gaulhofer@at.ibm.com
> Tel: +43/1/21145-2756
> **************************************************************
>
>
> "TURATI, JEAN-MICHEL" <JEAN-MICHEL.TURATI@disney.com> on 22.05.2002
> 11:07:02
>
> Please respond to "TURATI, JEAN-MICHEL" <JEAN-MICHEL.TURATI@disney.com>
>
> To: "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
> cc:
> Subject: RE: [nv-l] What does Cisco Works Buy Me?
>
>
>
> Bernard,
>
> Here are all the actions I did :
> 1. Install Ciscoworks2000 Integration Utility
> 2. Configuration :
> 2a Indicate nmidb.jar
> 2b For Ciscoview, define server, port and browser
> 2c For RME, define server, port and browser
> 2d Choose adapter Netview71AIXServer Adapter
> 3 In web console security, add the Cisco roles
> 4 Save and restart Web server
>
> I hope it helps.
> Also check if Ciscoview works in a standalone mode.
>
> Jean-Michel TURATI
> Euro Disney SCA - Bâtiment Génie
> BP 100 - 77777 Marne la Vallée Cedex 4
> jean-michel.turati@disney.com
> Tél 01 64 74 32 86 Fax 01 64 74 40 03
>
>
> > -----Original Message-----
> > From: bernard.baudoux@fortisbank.com
> > [mailto:bernard.baudoux@fortisbank.com]
> > Sent: mardi 21 mai 2002 16:07
> > To: 'nv-l@lists.tivoli.com'
> > Subject: RE: [nv-l] What does Cisco Works Buy Me?
> >
> > Jean-Michel,
> >
> > did you just check the two roles in the Web Security or did you do
> > anything more ?
> >
> > I've checked those two roles, and only RME is working fine, when I
select
> > CiscoView 5.x, nothing happens.
> > RME starts in a new windows just as expected, but CiscoView just does
> > (apparently) nothing.
> > Any idea ?
> >
> > Thanks,
> > Bernard Baudoux,
> > Fortis Banque.
> >
> >
> > -----Original Message-----
> > From: TURATI, JEAN-MICHEL [SMTP:JEAN-MICHEL.TURATI@disney.com]
> > Sent: vendredi 17 mai 2002 10:21
> > To: nv-l@lists.tivoli.com
> > Subject: RE: [nv-l] What does Cisco Works Buy Me?
> >
> >
> > We have just installed Netview 7.1 and CW integration. Wa can launch CW
> > from
> > Netview web console. There is an entry "Cisco" in the tools menu. But
to
> > see
> > the Cisco menu, you must have the Cisco roles. There are two roles
> > (Ciscoview and RME). They must be defined in the Administration menu
"Web
> > console security" for each user who wants to launch CW from Netview web
> > console.
> >
> > Jean-Michel TURATI
> > Euro Disney SCA - Batiment Genie
> > BP 100 - 77777 Marne la Vallee Cedex 4
> > jean-michel.turati@disney.com
> > Tel 01 64 74 32 86 Fax 01 64 74 40 03>
> >
> >
> > -----Original Message-----
> > From: Leslie Clark [mailto:lclark@us.ibm.com]
> > Sent: jeudi 16 mai 2002 17:47
> > To: nv-l@lists.tivoli.com
> > Subject: RE: [nv-l] What does Cisco Works Buy Me?
> >
> >
> > Well, I'll be!
> >
> > It was there in V6, but they took it away in V7 and I did not even
> notice,
> > since I'm not a big fan of launching it from Netview. Thanks for the
> > correction.
> >
> > Cordially,
> >
> > Leslie A. Clark
> > IBM Global Services - Systems Mgmt & Networking
> > Detroit
> >
> >
> >
> >
> > bernard.baudoux@for
> >
> > tisbank.com To:
> > "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
> > cc:
> >
> > 05/16/2002 09:58 AM Subject: RE: [nv-l]
> What
> > does Cisco Works Buy Me?
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Leslie,
> >
> > in you reply you state:
> >
> > "There is no overhead involved in having the integration on the
netview
> > system. If you launch CW from there, there is. If you launch it from
the
> > web client, the overhead is on your PC."
> >
> > From this I understand it is possible to launch CW from the Web
> interface.
> >
> > I have installed the integration, but do not see any menu option to CW.
> > Support says it is not possible to use CW from the Web.
> >
> > I'm a bit confused.
> >
> > Can you confirm whether or not I can access CW frm the Web and if yes,
> how
> > ?
> >
> > Thanks in advance,
> > Bernard Baudoux
> > Fortis Banque.
> >
> >
> >
> > > -----Original Message-----
> > > From: Leslie Clark [SMTP:lclark@us.ibm.com]
> > > Sent: jeudi 16 mai 2002 14:23
> > > To: nv-l@lists.tivoli.com
> > > Subject: Re: [nv-l] What does Cisco Works Buy Me?
> > >
> > > I still seem to miss-direct these about half the time...
> > >
> > > Cordially,
> > >
> > > Leslie A. Clark
> > > IBM Global Services - Systems Mgmt & Networking
> > > Detroit
> > >
> > >
> > >
> > > "Scott Bursik"
> > > <tivoliesm@hotmai To: Leslie
> > Clark/Southfield/IBM@IBMUS
> > > l.com> cc:
> > > Subject: Re: [nv-l]
> What
> > does Cisco Works Buy Me?
> > > 05/15/2002 03:54
> > > PM
> > >
> > >
> > >
> > >
> > >
> > > Leslie,
> > >
> > > Thank you so much for your clear and concise answer. That is exactly
> > what
> > I
> > > wanted to know!
> > >
> > >
> > > Scott Bursik
> > > Pepsico Business Solutions Group
> > > scott.bursik@pbsg.com
> > > >From: "Leslie Clark"
> > > >To: "Scott Bursik"
> > > >Subject: Re: [nv-l] What does Cisco Works Buy Me?
> > > >Date: Wed, 15 May 2002 14:05:43 -0400
> > > >
> > > >The best thing the integration buys you is recognizable Cisco
bitmaps
> > on
> > > >your Netview
> > > >map. It also adds fields with more specific information about the
> model
> > > >than you get
> > > >with the Agent field set by Netview from oid_to_type and the agents
> > list
> > > in
> > > >snmp_fields.
> > > >So cosmetics and info that is somewhat useful in reports. It loads
V2
> > > mibs,
> > > >which
> > > >you may or may not find useful :). It does NOT add trap definitions,
> > but
> > > >those are
> > > >all pretty much taken care of by the trapd.conf shipped with Netview
> > since
> > > >6.0.1.
> > > >
> > > >The other thing is the ability to lauch CW Device Manager from a
node
> > > >selected on the
> > > >map. Personally, I do not find this to be all that exciting. It
> > launches
> > > >the web browser
> > > >and points it to your CW server, just as you would manually, with
the
> > name
> > > >of the
> > > >node plugged in. You have to re-authenticate every time you launch
it.
> > I
> > > >would
> > > >rather just launch it myself once. But that's me.
> > > >
> > > >There is no overhead involved in having the integration on the
netview>
> > > >system.
> > > >If you launch CW from there, there is. If you launch it from the web
> > > >client, the
> > > >overhead is on your PC.
> > > >
> > > >Cordially,
> > > >
> > > >Leslie A. Clark
> > > >IBM Global Services - Systems Mgmt & Networking
> > > >Detroit
> > > >
> > > >
> > > >
> > > > "Scott Bursik"
> > > > > l.com> cc:
> > > > Subject: [nv-l] What does Cisco Works Buy Me?
> > > > 05/15/2002 08:51
> > > > AM
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >NetView 6.0.3 AIX 4.3.3
> > > >
> > > >
> > > >We are looking at what Cisco Works might be able to buy us. We are
> > > >currently running tham as 2 seperate applications with no
integration.
> > We>
> > > >are using the NetView database to "seed" Cisco Works with a script
> that
> > > >they provide that uses ovtopodump -o and some xnmsnmpconf -res
> commands
> > to
> > > >"dump" information into CW. Is the integration of CW and NetView a
> > tight
> > > >integration or does it just give enhancements to the user of the
GUI?
> I
> > > >haven't been able to find a great deal of documentation on the
> subject.
> > > >Maybe thats all I need is a push int he right direction. One last
> > > question?
> > > >What is the overhead of the CW integration? Will I notice any
> > performance
> > > >differences after the integration?
> > > >
> > > >
> > > >Thanks in advance!
> > > >
> > > >
> > > >Scott
> > > >
> > > >
> > > >
> > > >
> > > >Scott Bursik
> > > >Pepsico Business Solutions Group
> > > >scott.bursik@pbsg.com
> > > >
> > > >Chat with friends online, try MSN Messenger: Click Here
> > > >
---------------------------------------------------------------------
> > To
> > > >unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com For
additional
> > > >commands, e-mail: nv-l-help@lists.tivoli.com *NOTE* This is not an
> > Offical
> > > >Tivoli Support forum. If you need immediate assistance from Tivoli
> > please
> > > >call the IBM Tivoli Software Group help line at
> 1-800-TIVOLI8(848-6548)
> > > >
> > > >
> > >
> > > Join the world's largest e-mail service with MSN Hotmail. Click Here
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> > > For additional commands, e-mail: nv-l-help@lists.tivoli.com
> > >
> > > *NOTE*
> > > This is not an Offical Tivoli Support forum. If you need immediate
> > > assistance from Tivoli please call the IBM Tivoli Software Group
> > > help line at 1-800-TIVOLI8(848-6548)
> >
> >
> > This email and any attached files are confidential and may be legally
> > privileged.
> > If you are not the intended recipient, any disclosure, reproduction,
> > copying, distribution, or other dissemination or use of this
> communication
> > is strictly prohibited.
> > If you have received this transmission in error please notify the
sender
> > immediately and then delete this email.
> > Email transmission cannot be guaranteed to be secure or error free as
> > information could be intercepted, corrupted, lost, destroyed, arrive
late
> > or
> > incomplete, or contain viruses.
> > The sender therefore is in no way liable for any errors or omissions in
> > the
> > content of this message, which may arise as a result of email
> > transmission.
> > If verification is required, please request a hard copy.
> >
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> > For additional commands, e-mail: nv-l-help@lists.tivoli.com
> >
> > *NOTE*
> > This is not an Offical Tivoli Support forum. If you need immediate
> > assistance from Tivoli please call the IBM Tivoli Software Group
> > help line at 1-800-TIVOLI8(848-6548)
> >
> > #### C.DTF has been removed from this note on May 16 2002 by Leslie
Clark>
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> > For additional commands, e-mail: nv-l-help@lists.tivoli.com
> >
> > *NOTE*
> > This is not an Offical Tivoli Support forum. If you need immediate
> > assistance from Tivoli please call the IBM Tivoli Software Group
> > help line at 1-800-TIVOLI8(848-6548)
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> > For additional commands, e-mail: nv-l-help@lists.tivoli.com
> >
> > *NOTE*
> > This is not an Offical Tivoli Support forum. If you need immediate
> > assistance from Tivoli please call the IBM Tivoli Software Group
> > help line at 1-800-TIVOLI8(848-6548)
> > This email and any attached files are confidential and may be legally
> > privileged.
> > If you are not the intended recipient, any disclosure, reproduction,
> > copying, distribution, or other dissemination or use of this
> communication
> >
> > is strictly prohibited.
> > If you have received this transmission in error please notify the
sender
> > immediately and then delete this email.
> > Email transmission cannot be guaranteed to be secure or error free as
> > information could be intercepted, corrupted, lost, destroyed, arrive
late
> > or
> > incomplete, or contain viruses.
> > The sender therefore is in no way liable for any errors or omissions in
> > the
> > content of this message, which may arise as a result of email
> > transmission.
> > If verification is required, please request a hard copy.
> >
> >
> >
> > << File: ATT142854.txt >>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
This email and any attached files are confidential and may be legally
privileged.
If you are not the intended recipient, any disclosure, reproduction,
copying, distribution, or other dissemination or use of this communication
is strictly prohibited.
If you have received this transmission in error please notify the sender
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or
incomplete, or contain viruses.
The sender therefore is in no way liable for any errors or omissions in the
content of this message, which may arise as a result of email transmission.
If verification is required, please request a hard copy.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|