RE: [nv-l] Changing label of node

[jeff.ctr.vandenbussche@faa.gov]

Bernard,

Thanks for your reply.  I guess I should have clarified this.  I would like
to be able to do this automated, not manually.
Any suggestions?

Thanks,

Jeff


                                                                                
                               
                      <bernard.baudoux@fort                                     
                               
                      isbank.com>                  To:       Jeff CTR 
Vandenbussche/ACT/CNTR/FAA@FAA           
                                                   cc:       
"'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com> 
                      11/05/02 04:29 AM            Subject:  RE: [nv-l] 
Changing label of node                 
                                                                                
                               
                                                                                
                               




Hello Jeff,

to modify the label of a symbol in Netview you can do as follows:

right click on the given symbol, then left click on 'Edit',
'Modify/Describe', 'Symbol'.
Then a window "Symbol Description" is displayed and there you can write
anything you want as a label.
Beware this applies only to the symbol on which you have right clicked.
If there are other instances of that symbol you must repeat this as many
times as necessary.

Hope this helps,
Bernard Baudoux,
Fortis Banque.


> -----Original Message-----
> From:            jeff.ctr.vandenbussche@faa.gov
[SMTP:jeff.ctr.vandenbussche@faa.gov]
> Sent:            lundi 4 novembre 2002 22:34
> To:        nv-l@lists.tivoli.com
> Subject:         [nv-l] Changing label of node
>
> Does anyone have any ideas how to change the label of a node on the IPMap
> to anything other than is in the /etc/host file.  I have 2 boxes node1
and
> node2 that are either "primary" or "redundant", and would like to be able
> to change the label on my home map (X.X.X.X Segment1) to reflect this
> state.  Please let me know.
>
> Thanks,
>
> Jeff
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)

This email and any attached files are confidential and may be legally
privileged.
If you are not the intended recipient, any disclosure, reproduction,
copying, distribution, or other dissemination or use of this communication
is strictly prohibited.
If you have received this transmission in error please notify the sender
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or
incomplete, or contain viruses.
The sender therefore is in no way liable for any errors or omissions in the

content of this message, which may arise as a result of email transmission.

If verification is required, please request a hard copy.