Re: [nv-l] Physical port monitoring

[netview@toddh.net (Todd H.)]

"Mike Walsh" <Mike.Walsh@us.ing.com> writes:
> Goodmorning,
> 
> I have a 5 T1 IMA group.  The IMA Group (Common IP address) is up but one
> of the physical T1's is hard down.  Netview does not seem to monitor or
> alarm on the failure of a single T1 in the IMA Group.  Does anyone out
> there know of a means of forceing Netview to monitor and alarm on a single
> physical port?

Caveat: I'm not familiar with "T1's in an IMA group."  So I can offer
these general thoughts:

What do the T1's terminate into (CSU/DSU?)?  Is that device SNMP
manageable?  Would there be MIB variable you could query with netview
or a script to find what you seek?  Does the device trap on the
failure of any of hte physical links?  

-- 
Todd H.
http://www.toddh.net/

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)