Here is the state transition for the EntryStatus is as followed ... maybe
that will give you an idea on what you are allowed to change as a manager
A manager is restricted to changing the state of an entry in
the following ways:
To: valid createRequest underCreation invalid
From:
valid OK NO OK OK
createRequest N/A N/A N/A N/A
underCreation OK NO OK OK
invalid NO NO NO OK
nonExistent NO OK NO OK
and here are the values ...
EntryStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of a table entry....
"
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
Hope it helps ....
Claudius,
-----Original Message-----
From: Joe Fernandez [mailto:jfernand@kardinia.com]
Sent: May 27, 2003 12:36 AM
To: nv-l@lists.tivoli.com
Subject: Re: [nv-l] SNMP set error: no such name
Manish,
You say you are trying this on your company's Agent. Have you implemented a
v3
Agent (or a multi version v1/v2c/v3 agent?)
If so, and if you are trying to do a Set from a v1 Manager , while you have
v3
Authentication turned on, I think you will get an authorization error. If
the
agent is multi version, it will recognize your Manager as v1 and translate
the
error to "noSuchName" before sending it.
You say the Set works using the SNMP Research utilities. Try this using the
v1
option on the utilities and see if you get the same error message. If so,
browse the MIB with the utilities, look for snmpInBadCommunityUses, and see
if
it is being incremented.
You also mention that you are trying to change the rowStatus from "valid".
This
does not appear in the list of allowed values for rowStatus.
At 05:45 PM 26/05/2003 +0700, Manish Purwar wrote:
>
> Hi,
>
> We are using NetView 7.1.3 on windows.
>
> We are trying to set the values of MIB objects of our companies product
> Agent,
> through NetView Web Console MIB Browser (SNMPv1/v2). We are using SNMP
> Research Agent implementation.
>
> When we are trying to change the status of the rows (of table) from
> "valid" to any state like "notInService", then the set operation is
getting
> failed with the error message "noSuchName".
>
> Now we are changing the status of the row from "valid" to "notInService",
> using SNMP Research Agent utilities. Now we are able to set the values
> of that row using NetView Web Console MIB Browser but we are not
> able to set the status of this row to "active". Again we are getting the
> "noSuchName" error.
>
> So it seems that we are not able to set the values of MIB objects when
> the row status is "active" and when the row status is any thing other than
> "active" then we are not able to change that to "active" using NetView
> Web Console MIB Browser.
>
> Can any body give me any clues, why is it happening like this?
>
> TIA.
>
> Best regards,
> Manish Purwar
>
Joe Fernandez
Kardinia Software
jfernand@kardinia.com
http://www.kardinia.com
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|