We are implementing v1/v2c/v3 agent. We are able to set the
table MIB objects using SNMP Research utilities using SNMPv1
set requests as suggested by Joe Fernandez.
State transition table of EntryStatus is also very helpful.
We sincerially appreciate the suggestions by Claudius and Joe.
Thanks!!!
Best regards,
Manish Purwar
----- Original Message -----
From: <claude.ndjou'ou@dfait-maeci.gc.ca>
To: <nv-l@lists.tivoli.com>
Sent: Wednesday, May 28, 2003 1:46 AM
Subject: RE: [nv-l] SNMP set error: no such name
> Here is the state transition for the EntryStatus is as followed ... maybe
> that will give you an idea on what you are allowed to change as a manager
>
> A manager is restricted to changing the state of an entry in
> the following ways:
>
> To: valid createRequest underCreation invalid
> From:
> valid OK NO OK OK
> createRequest N/A N/A N/A N/A
> underCreation OK NO OK OK
> invalid NO NO NO OK
> nonExistent NO OK NO OK
>
> and here are the values ...
>
> EntryStatus ::= TEXTUAL-CONVENTION
> STATUS current
> DESCRIPTION
> "The status of a table entry....
> "
> SYNTAX INTEGER {
> valid(1),
> createRequest(2),
> underCreation(3),
> invalid(4)
> }
>
> Hope it helps ....
> Claudius,
>
> -----Original Message-----
> From: Joe Fernandez [mailto:jfernand@kardinia.com]
> Sent: May 27, 2003 12:36 AM
> To: nv-l@lists.tivoli.com
> Subject: Re: [nv-l] SNMP set error: no such name
>
>
> Manish,
>
> You say you are trying this on your company's Agent. Have you implemented
a
> v3
> Agent (or a multi version v1/v2c/v3 agent?)
>
> If so, and if you are trying to do a Set from a v1 Manager , while you
have
> v3
> Authentication turned on, I think you will get an authorization error. If
> the
> agent is multi version, it will recognize your Manager as v1 and translate
> the
> error to "noSuchName" before sending it.
>
> You say the Set works using the SNMP Research utilities. Try this using
the
> v1
> option on the utilities and see if you get the same error message. If so,
> browse the MIB with the utilities, look for snmpInBadCommunityUses, and
see
> if
> it is being incremented.
>
> You also mention that you are trying to change the rowStatus from "valid".
> This
> does not appear in the list of allowed values for rowStatus.
>
>
>
> At 05:45 PM 26/05/2003 +0700, Manish Purwar wrote:
> >
> > Hi,
> >
> > We are using NetView 7.1.3 on windows.
> >
> > We are trying to set the values of MIB objects of our companies product
> > Agent,
> > through NetView Web Console MIB Browser (SNMPv1/v2). We are using SNMP
> > Research Agent implementation.
> >
> > When we are trying to change the status of the rows (of table) from
> > "valid" to any state like "notInService", then the set operation is
> getting
> > failed with the error message "noSuchName".
> >
> > Now we are changing the status of the row from "valid" to
"notInService",
> > using SNMP Research Agent utilities. Now we are able to set the values
> > of that row using NetView Web Console MIB Browser but we are not
> > able to set the status of this row to "active". Again we are getting the
> > "noSuchName" error.
> >
> > So it seems that we are not able to set the values of MIB objects when
> > the row status is "active" and when the row status is any thing other
than
> > "active" then we are not able to change that to "active" using NetView
> > Web Console MIB Browser.
> >
> > Can any body give me any clues, why is it happening like this?
> >
> > TIA.
> >
> > Best regards,
> > Manish Purwar
> >
>
>
>
> Joe Fernandez
> Kardinia Software
> jfernand@kardinia.com
>
> http://www.kardinia.com
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|