nv-l
[Top] [All Lists]

RE: [nv-l] Errors in trapd.log related to community name

To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] Errors in trapd.log related to community name
From: "Dietmar Gaulhofer" <DIETMAR_GAULHOFER@at.ibm.com>
Date: Thu, 25 Sep 2003 12:43:42 +0200
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Thu, 25 Sep 2003 11:44:12 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Importance: Normal
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm
Sensitivity:
Hi,

i would try following:

/usr/OV/bin/nmdemandpoll "selection-name" to see if a config poll is
working
/usr/OV/bin/quicktest "selection-name" to see if status poll is working

to get the Selection-Name used in netview, i recommend to use

/usr/OV/bin/ovtopodump -r "ip address from the router" - the output will be
the "Selection-Name where the Ip-address is
attached to.

also useful:

/usr/OV/bin/xnmsnmpconf -resolv "ip-address" -> shows what netview will use
for polling.

Check if you use the "alternative Community file" also for polling ?
(config in serversetup).

Personaly i don't use the "alternative Community file at all - because it
adds single entries to the snmp configuration. And
i prefere the Wildcarding in the snmp configuration.

Dietmar




anand anupam <ananda@bharatpetroleum.com> on 25.09.2003 06:24:09

To:    robin.james@eurocontrol.int, nv-l@lists.tivoli.com
cc:
Subject:    RE: [nv-l] Errors in trapd.log related to community name


Hello Robin,

I have run "xnmsnmpconf -clearCache" as root. But the problem is still
there.

I also deleated all entry from "option->snmp configuration" menu for all
routers. Then restarted NetView map. Some routers have appeared in the
"snmp configuration" menu. But the problem is still there.

In trapd.log, following syntax is appearing as errorr :-

On the production :-
1064384482 11 Wed Sep 24 12:51:22 2003 BBRT                      A Cisco
Incorrect Community Name (authenticationFailure Trap) authAddr: BPCLNV
1064384487 11 Wed Sep 24 12:51:27 2003 BBRT                      A Cisco
Incorrect Community Name (authenticationFailure Trap) authAddr: BPCLNV
1064384490 11 Wed Sep 24 12:51:30 2003 BBRT                      A Cisco
Incorrect Community Name (authenticationFailure Trap) authAddr: BPCLNV

On Lab server:-

1064385128 11 Wed Sep 24 13:02:08 2003 BBRT                      A
Catalyst116CIncorrect Community Name (authenticationFailure Trap)
1064385133 11 Wed Sep 24 13:02:13 2003 BBRT                      A
Catalyst116CIncorrect Community Name (authenticationFailure Trap)
1064385136 11 Wed Sep 24 13:02:16 2003 BBRT                      A
Catalyst116CIncorrect Community Name (authenticationFailure Trap)
Inititial ouput of snmpwalk for this node

^C# ./snmpwalk BBRT
system.sysDescr.0 : DISPLAY STRING- (ascii):  Cisco Internetwork Operating
Syste
m Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(2)XQ1, EARLY DEPLOYMENT
RELEAS
E SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 28-Aug-01
system.sysObjectID.0 : OBJECT IDENTIFIER:
.iso.org.dod.internet.private.en
terprises.cisco.ciscoProducts.326
system.sysUpTime.0 : Timeticks: (1010242) 2:48:22.42
system.sysContact.0 : DISPLAY STRING- (ascii):
system.sysName.0 : DISPLAY STRING- (ascii):  bbrt
system.sysLocation.0 : DISPLAY STRING- (ascii):  "Budge budge Installation"
system.sysServices.0 : INTEGER: 78
system.8.0 : Timeticks: (0) 0:00:00.00
interfaces.ifNumber.0 : INTEGER: 11
interfaces.ifTable.ifEntry.ifIndex.1 : INTEGER: 1
interfaces.ifTable.ifEntry.ifIndex.2 : INTEGER: 2
interfaces.ifTable.ifEntry.ifIndex.3 : INTEGER: 3
interfaces.ifTable.ifEntry.ifIndex.4 : INTEGER: 4
interfaces.ifTable.ifEntry.ifIndex.5 : INTEGER: 5


Regrads,
Anupam
      -----Original Message-----
      From: JAMES Robin [mailto:robin.james@eurocontrol.int]
      Sent: Tuesday, September 23, 2003 2:25 PM
      To: 'Nv-L (nv-l@lists.tivoli.com)'
      Subject: RE: [nv-l] Errors in trapd.log related to community name

      xnmsnmpconf is the application run when you select Options->SNMP
      Configuration. You say the window shows a community name compatible
      with your routers. There is one thing I suggest you try. Run the
      command "xnmsnmpconf -clearcache" as root. Netview maintains a cache
      for IP addresses and SNMP parameters and the cache probably has all
      your old settings. See "man xnmsnmpconf" for a fuller description
      about what this option does. You could also do a "-dumpcache
      -verbose" to confirm this before you clear the cache.

      Good luck
      Robin

      -----Original Message-----
      From: anand anupam [mailto:ananda@bharatpetroleum.com]
      Sent: Tuesday 23 September 2003 10:22
      To: JAMES Robin
      Subject: RE: [nv-l] Errors in trapd.log related to community name

      Hello,

      Under "option->snmp configuration" menu, almost all the routers are
      showing correct "community name" as defined. All these community name
      is also defined in "communityNames.conf" file. Also, I am able to do
      demand poll for all these routers through GUI.

      After disabling "public" community name, I have not run xnmsnmpconf.
      What is the correct syntax to run xnmsnmpconf for all the routers.

      Regards,
      Anupam
            -----Original Message-----
            From: JAMES Robin [mailto:robin.james@eurocontrol.int]
            Sent: Tuesday, September 23, 2003 12:26 PM
            To: 'Nv-L (nv-l@lists.tivoli.com)'
            Subject: RE: [nv-l] Errors in trapd.log related to community
            name

            You must also configure the netview polling to use one of these
            new community names. Have you run xnmsnmpconf to use one of the
            new ones, if not, it is probably still using public?

            Regards
            Robin

            -----Original Message-----
            From: anand anupam [mailto:ananda@bharatpetroleum.com]
            Sent: Tuesday 23 September 2003 06:48
            To: nv-l@lists.tivoli.com
            Subject: [nv-l] Errors in trapd.log related to community name



            Hello Everybody,


            We are having NetView 6.0.2 on AIX 4.3.3


            We have defined six different community names in
            "communityNames.conf" file under /usr/OV/conf directory for our
            routers. Each routers have been configured to send SNMP trapd
            to two AIX boxes(production+lab).


            Recently, we started getting the following errors in our
            trapd.log :-
            ++++++
            1064214682 11 Mon Sep 22 13:41:22 2003 BHILAIRT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr: BPCLNV

            1064214728 11 Mon Sep 22 13:42:08 2003 SABARMATIRT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr: BPCLNV

            1064214733 11 Mon Sep 22 13:42:13 2003 MIRAJRT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr: BPCLNV

            1064214755 11 Mon Sep 22 13:42:35 2003 NDARORT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr:
            10.88.13.8
            1064214755 11 Mon Sep 22 13:42:35 2003 NDARORT2
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr:
            10.88.13.8
            1064214775 11 Mon Sep 22 13:42:55 2003 swc_core1
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap)
            1064214780 11 Mon Sep 22 13:43:00 2003 swc_core1
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap)
            1064214828 11 Mon Sep 22 13:43:48 2003 MIRAJRT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr: BPCLNV

            1064214828 11 Mon Sep 22 13:43:48 2003 SABARMATIRT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr: BPCLNV

            1064215008 11 Mon Sep 22 13:46:48 2003 MIRAJRT
            A Cisco Incorre
            ct Community Name (authenticationFailure Trap) authAddr: BPCLNV

            1064215008 11 Mon Sep 22 13:46:48 2003 SABARMATIRT
            A Cisco Incorre
            ++++++


            These errors were not coming earlier. But now are coming for
            almost all the routers. Probably, network administrators have
            removed public community name from all these routers. I
            suppose, public community name is not mandatory?


            Then what could be the reason for these errors and where this
            could impact?


            Regards,
            Anupam





            
******************************************Disclaimer*************************************

            The information contained in this message is BPCL's
            Confidential and Proprietary information and is intended only
            for the use of the recipient(s) named above.  If the reader of
            this message is not the intended recipient, he/she is hereby
            notified that any use, dissemination, distribution, or copying
            of this communication or any of its content is strictly
            prohibited.  In such case, please advise the sender immediately
            and delete it from your system.  Further acknowledges that any
            views expressed in this message are those of the individual
            sender and no binding nature of the message shall be implied or
            assumed unless the sender does so expressly with due authority
            of BPCL.


            
********************************************************************************************




            ____ This message and any files transmitted with it are legally
            privileged and intended for the sole use of the individual(s)
            or entity to whom they are addressed. If you are not the
            intended recipient, please notify the sender by reply and
            delete the message and any attachments from your system. Any
            unauthorised use or disclosure of the content of this message
            is strictly prohibited and may be unlawful. Nothing in this
            e-mail message amounts to a contractual or legal commitment on
            the part of EUROCONTROL unless it is confirmed by appropriately
            signed hard copy. Any views expressed in this message are those
            of the sender.



      
******************************************Disclaimer*************************************


      The information contained in this message is BPCL's Confidential and
      Proprietary information and is intended only for the use of the
      recipient(s) named above. If the reader of this message is not the
      intended recipient, he/she is hereby notified that any use,
      dissemination, distribution, or copying of this communication or any
      of its content is strictly prohibited. In such case, please advise
      the sender immediately and delete it from your system. Further
      acknowledges that any views expressed in this message are those of
      the individual sender and no binding nature of the message shall be
      implied or assumed unless the sender does so expressly with due
      authority of BPCL.


      
********************************************************************************************




      ____ This message and any files transmitted with it are legally
      privileged and intended for the sole use of the individual(s) or
      entity to whom they are addressed. If you are not the intended
      recipient, please notify the sender by reply and delete the message
      and any attachments from your system. Any unauthorised use or
      disclosure of the content of this message is strictly prohibited and
      may be unlawful. Nothing in this e-mail message amounts to a
      contractual or legal commitment on the part of EUROCONTROL unless it
      is confirmed by appropriately signed hard copy. Any views expressed
      in this message are those of the sender.



******************************************Disclaimer*************************************


The information contained in this message is BPCL's Confidential and
Proprietary information and is intended only for the use of the
recipient(s) named above. If the reader of this message is not the intended
recipient, he/she is hereby notified that any use, dissemination,
distribution, or copying of this communication or any of its content is
strictly prohibited. In such case, please advise the sender immediately and
delete it from your system. Further acknowledges that any views expressed
in this message are those of the individual sender and no binding nature of
the message shall be implied or assumed unless the sender does so expressly
with due authority of BPCL.


********************************************************************************************







---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web