SNMP protocol is enabled, the right community is set within the switch and Netview... I believe I have the right MIB loaded since I can see all the interfaces under the "OTHER" section. Can you tell me which MIBS should be loaded just to verify?
The following config section is set in the switch:
set snmp community read-only <C.Name>
set snmp community read-write <C.Name>
set snmp community read-write-all <C.Name>
set snmp trap enable module
set snmp trap enable chassis
set snmp trap enable bridge
set snmp trap enable repeater
set snmp trap enable vtp
set snmp trap enable auth
set snmp trap enable ippermit
set snmp trap enable vmps
set snmp trap enable entity
set snmp trap enable config
set snmp trap enable stpx
set snmp trap enable syslog
set snmp trap enable system
set snmp trap 10.105.217.24 <C.Name> port 162 owner CLI index 1
Carlos
|
Mario Behring <mariobehring@yahoo.com>
09/30/2003 10:01 AM |
To: nv-l@lists.tivoli.com
cc:
Subject: Re: [nv-l] Web console |
Carlos,
My NetView is also running on a W2K machine and this option is working fine. You have to check some things first:
- Check if your switches have SNMP protocol enabled.
- Check community names (insert on Specific Nodes or Wildcards at Options-> SNMP).
- Check loaded MIB files. You can find many MIB files in the Internet by device manufacturer and load them into NetView.
HTH.
Mario Behring
Tivoli Consultant
Siemens Business Services
55 11 3908-2369
55 11 8125-5598
mariobehring@yahoo.com
CMazon@commercebankfl.com wrote:
I'm starting to think that Netview is far better off on AIX than it is on Windows.... there are correlation rules that are not supported on Windows, no admin guide, and a much longer list. We are a complete Windows shop. Does anyone know if all the functions that are provided in Unix are also available in Linux. I can get away with having a Linux box in our environment, but purchasing a SUN box is a whole different story.
Carlos
|
Jane Curry <jane.curry@skills-1st.co.uk>
09/30/2003 03:08 AM |
To: nv-l@lists.tivoli.com
cc:
Subject: Re: [nv-l] Web console |
It works for me. I have my NetView 7.1.3 plus Fixpack 1 on AIX 5.1 with
my Web Console on Win2K Server. Does the switch you have selected
support the bridge MIB (RFC1493)?? Has the community name changed on
this switch so that it effectively no longer supports SNMP at all?
I would suspect problems with the switch on this one, rather than NetView.
Cheers,
Jane
CMazon@commercebankfl.com wrote:
>
> Newtview 7.1.3 / Win 2k Advanced Server
>
>
! > In the web console when monitoring a switch... there is a menu for
> Switch Management ---- Port view. When viewing this, I get a Not
> Supported going accross all the fields. Has anyone come accross this
> and how do you get it to activate?
>
> Thanks.
>
> Carlos
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2003 Jane Curry <jane.curry@skills-1st.co.uk>. All rights reserved.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
Mario, do you have the switch OID entered in the /usr/OV/conf/oid_to_type file with a "B" FLAG, as shown in my example below...