Re: [nv-l] Interface Discovery

["Mike Walsh" <Mike.Walsh@us.ing.com>]

How bout DNS - Both forward and reverse?  If Netview doesn't get the proper
response to both, it will display the device only as an IP address.


Mike Walsh
****Please Note - New EMAIL Address  mike.walsh@us.ing.com*********
612-342-3118


                                                                                
                                                       
                      reamd@nationwide.                                         
                                                       
                      com                      To:       nv-l@lists.us.ibm.com  
                                                       
                                               cc:       nv-l@lists.us.ibm.com, 
owner-nv-l@lists.us.ibm.com                            
                      11/13/2003 09:17         Subject:  Re: [nv-l] Interface 
Discovery                                                
                      AM                                                        
                                                       
                      Please respond to                                         
                                                       
                      nv-l                                                      
                                                       
                                                                                
                                                       
                                                                                
                                                       



I have done a demand poll. I have snmp to the device. I can snmpwalk it and
it brings in the correct bitmaps when discovered. When you drill down to
see the interfaces of the router. It will show all interfaces and there
status, it just shows the interface IP address and not the interface
description.


                          James Shanks
                          <jshanks@us.ibm.com>     T
                                                   To:
nv-l@lists.us.ibm.com
                          Sent by:                 cc:
                          owner-nv-l@lists.us.ibm
                          .com                     bcc:
                                                   Subject:
Re: [nv-l] Interface Discovery
                          11/13/2003 09:24 AM
                          Please respond to nv-l





Have you tried a demand poll?

You won't get that information until a config poll is done: it requires
SNMP.  If you have a device on the map and no information about i in the
databases, then your community string for that device is probably wrong.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group


    reamd@Nationwide.com
    Sent by:                                 To:
    owner-nv-l@lists.us.ibm.com      nv-l@lists.us.ibm.com
                                             cc:
                                             Subject:        [nv-l]
    11/13/2003 09:11 AM              Interface Discovery
    Please respond to nv-l






Hi All,
         During discovery, netview discovers the device and interfaces.
Instead of telling what type of interface it is (FastEthernet, Serial, ect)
it gives me IP addresses. How do I change this. Thanks, Dave

Netview 7.1.3
AIX 5.1