RE: [nv-l] Cisco 2500 routers and NetView

[CMazon@commercebankfl.com]

We have several 2500 series routers
and I also resolved the issue by increasing the retry and the retry intervals.

Carlos Mazon

"Seminara, Sandro" <SSeminara@fnis.com> Sent by: owner-nv-l@lists.us.ibm.com 01/12/2004 01:32 AM Please respond to nv-l

To:        "'nv-l@lists.us.ibm.com'" <nv-l@lists.us.ibm.com>         cc:                 Subject:        RE: [nv-l] Cisco 2500 routers and NetView

I experienced the same problem about 2 years ago before
we replaced our 2500 series routers.  We had approx. 700 2500 series
routers of various flavors deployed though out our WAN.  Many of these
devices were running out of memory during demand polls etc.  In order
combat our polling issues, the only thing we could do was increase the
retry and lower the timeout values.

Thank you
Sandro Seminara
Fidelity National Financial

-----Original Message-----
From: Alan E. Hennis [mailto:Hennis_Alan_E@cat.com]
Sent: Sunday, January 11, 2004 8:03 PM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] Cisco 2500 routers and NetView

NV 7.1.3 FP 1 RH Linux 7.2

I have a lot of old Cisco 25xx routers in my network. There are plans to
replace these older devices this year but not until much later in the year.
I poll all of my routers via SNMP.  I see a lot of missed SNMP queries of
these routers. This causes NetView to report the router down when it is in
fact still reachable.  I was wondering if anyone on the list has
experienced this of has any suggestions on how to better monitor older
Cisco routers.

Thanks
Alan E. Hennis
Caterpillar Inc
Systems+Process Division
309.494.3308
hennis_alan_e@cat.com