|
Are
you using SNMP status polling for these routers ?
I
have
seen this when resources are low on the NetView server, which may cause SNMP
status polling to time out.
Don
Davis
Hello list,
I am facing the following
problem:
We have about 200 branches (ARN Nortel routers) and for some branches about
10, the routers are shown as yellow. When I check the interfaces I see that
the WAN interface is red. When I test the interface (ping) the interface
responds and becomes green. After some seconds it goes back to read state.
Any
ideas why this is happening will be greatly appreciated.
Netview 7.1.1
AIX 4.3
ARN Nortel
Routers
Best regards,
Ioannis Yerou
Senior Systems
Programmer/Communications
ITD, Bank of Cyprus
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and
are intended solely for the use of individual or entity to whom they are
addressed. If you are not the intended recipient or the person responsible
for delivering the electronic mail to the intended recipient, be advised that
you have received this electronic mail in error and that any use,
dissemination, forwarding, printing, or copying of this electronic mail is
strictly prohibited. If you have received this electronic mail in error,
please immediately notify the sender by return mail.
==============================================================================
|