Re: [nv-l] SNMP v2c/v3 Support

[awatthey@mmm.com]

Matt,

FP3 will not enable this support on its own.  There is a section in the FP3
readme that tells you what to do to get it to work.  Basically you have to
disable the Windows SNMPTRAP service which does not support V2.  In fact
there are quite a few things that have to be done manually after having put
FP3 on if you want to get some of the fixes installed as the FP3 install
doesn't automatically replace files where local mods might already exist
and be lost.

Regards,
Alan.


                                                                           
             "Bigarani,                                                    
             Matthew \(Matt\)"                                             
             <bigarani@avaya.c                                          To 
             om>                       <nv-l@lists.us.ibm.com>             
             Sent by:                                                   cc 
             owner-nv-l@lists.         "Innes, Russell \(Russ\)"           
             us.ibm.com                <rinnes@avaya.com>                  
                                       "Mccarty, William \(Bill\)"         
                                       <mccarty@avaya.com>                 
             29/06/2005 01:22                                      Subject 
                                       [nv-l] SNMP v2c/v3 Support          
                                                                           
             Please respond to                                             
             nv-l@lists.us.ibm                                             
                   .com                                                    
                                                                           
                                                                           




Hi,

I'm trying to verify that NetView can receive SNMP traps sent by our
system. v1 traps always come up in the event viewer, but I've been
unable to get NetView to catch any v2c traps. I'm running NetView 7.1.4
on Windows XP Pro v2002 w/ SP1, and I have applied NetView FixPack 3.

I read through the list archives and saw it mentioned that 7.1.4 would
support v2 traps when FixPack 2 was applied
(http://lists.skills-1st.co.uk/mharc/html/nv-l/2004-08/msg00113.html),
am I wrong to assume that FixPack 3 includes the changes in FixPack 2?
Is anyone aware of other config steps that need to be taken to receive
v2c traps?

Does anyone have any experience with the SNMPv3 front-end mentioned in
this thread?
http://lists.skills-1st.co.uk/mharc/html/nv-l/2004-01/msg00340.html
http://www.snmp.com/products/snmpsecpack.html

Thanks in advance,
Matt Bigarani