Why cannot you just restart the daemon tecad_nv6k using serversetup?
Or simply "ovstart", or more specifically "ovstart tecad_nv6k", from the
command line?
Once tecconfig.bat has been run, the configuration file
\usr\ov\conf\tecad_nv6k.conbf has been altered to reflect what you selected
in the configurator, and the proper daemon executable has been established
in \usr\ov\bin, and registered in \usr\ov\conf\ovsuf. That's what it's job
is. Starting the daemon for you is the last step and one which is easily
accomplished in other ways.
As for the daemon stopping, are you logging out of the NetView server when
this happens or does it seems to just occur? The former is a known
problem and there is a temporary fix for it available from NetView Level 2.
In the latter case, you can set up logging and tracing for this daemon
using the \usr\ov\conf\tecad_nv6k.err file by entering a destination file
(for example "\usr\ov\log\tecad.log") for each level of tracing you want to
see.
And in any case, I'd recommend a call the NetView Level 2 by opening a
problem ticket with IBM to get some assistance on troubleshooting this.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"Senny M"
<senthil.mani@ust
ri.com> To
Sent by: "IBM Tivoli Netview"
owner-nv-l@lists. <nv-l@lists.tivoli.com>
us.ibm.com cc
Subject
12/08/2005 11:22 [nv-l] Problem with Event
AM forwarding to TEC on Tivoli Netview
7.1.4
Please respond to
nv-l
Hi there,
I am using IBM Tivoli Netview 7.1.4 in Windows 2003 platform. Also, I
enabled forwarding the Events to my TEC server using the batch file
provided by Tivoli Netview (tecconfig.bat). I observed an issue with event
forwarding to TEC Server from Netview server i.e. it is stopping the event
forwarding process at times. This forces me to start and run the batch
file entirely to resume the event forwarding. The frequency is at least
twice a day.
Did anyone come across with this issue? If so, could you please share how
this was resolved?
Also is there any other way that I can sort this issue using a simple batch
file running an executable instead of running the whole process of event
forwarding using the batch file provided by Netview (tecconfig.bat)?
---------------------------------------|
(Embedded image moved to| |
file: pic29989.jpg) | |
---------------------------------------|
Senthil Kumar M GNOC
senthil.mani@ustri.com 4N Bhavani
Technopark, Trivandrum
PSTN: ++91-471-2335777 Extn 8653
VOIP: ++1-949-716-8239 Extn 1118
pic29989.jpg
Description: JPEG image
|
