Thanks for the various input. I have loaded the baroc files with nvserverd
after teacd_nk6k after tecad_ov.baroc. I have
also checked wtdumprl and there is nothing there from any of these sources.
Stuff comes through from the logfile adapter
fine. I am at a later patch than Vladimir suggests so I assume that this
supercedes 443133?
Any more clues? Anyone doing this with an NT TEC?
Cheers, Jane
Vladimir Petr wrote:
> Hello, Jane;
> Did you apply PTF U443133 for NV 4? This patch brings an integrated event
> adapter into nvserverd.
> If you get NO events from the source nvserverd (seen in wtdumprl output) into
> the reception log (tec_t_evt_rec_log) then
> the problem is likely to seek at the adapter level.
>
> Best regards,
> Vladimir.
>
> Jane Curry wrote:
>
> > Still struggling with this - I think I have a bug situation - can anyone
> > confirm?
> > I have AIX 4.2.1, Framework 3.2 (no SuperPatch), TEC 3.1 (no patches
> > applied), NetView
> > 4.1.2.0, PTF U453385. If I configure the nvserverd TEC adapter, simply
> > supplying the DNS
> > name of my TEC Server and the rulebase of either forwardall.rs or a
> > specific ruleset, the
> > response from smit is that everything is OK. I never get any events
> > into TEC from nvserverd
> > - I have used iptrace and although I can see logfile events going from
> > the NV machine to TEC,
> > it looks like none are ever generated from nvserverd. The other little
> > "bonus" is that I get
> > no events at all in nvevents! There seem to have been a number of
> > problems in the past with
> > nvserverd core'ing..... I can get nvevents restarted by deconfiguring
> > my nvserverd TEC
> > adapter, and doing ovstop and ovstart on nvserverd - then they all flood
> > in - they're setting
> > there in trapd.log and can be seen as expected when they arrive.
> >
> > I have no core dumps, nothing in nv6000.log and nothing in
> > ESE.automation. The old
> > teacd_nv6k adapter works fine but I'd rather use the new one to position
> > us for moving to NV
> > V5.
> >
> > Oh yes - my TEC is NT.
> > Doug, do you have an NT TEC??
> > Many thanks for any further pointers,
> > Jane
> >
> > Doug Sutherland wrote:
> >
> > > From: Doug Sutherland@SHAW on 11/11/98 04:46 PM
> > >
> > > To: tme10@www.us.net
> > > cc:
> > > Subject: RE: tme10 TEC NetView V4 integration with nvserverd
> > >
> > > Jane,
> > > Have you gone into to the GUI Rulebuilder on Netview to see what
> > if
> > > any events are being forwarded to TEC? From the main map, click on
> > > "Tools". Then click on "Ruleset editor...". You should be able to
> > open
> > > the current ruleset that you are using. You should have some if not
> > all
> > > events being fed into the FORWARD icon. This then sends the events on
> > to
> > > the TEC Server. I am running Framework 3.1.4, TEC 3.1.1 on AIX,
> > Netview
> > > Version 4 on AIX. I hope this helps.
> > >
> > > Doug Sutherland
> > > SAN Management Architect
> > > mailto:Doug.Sutherland@shawinc.com
> > > Shaw Industries
> > >
> > > Copyright (c) 1998 "Doug Sutherland" <Doug_Sutherland@shawinc.com>.
> > All rights reserved.
> > >
> > > TME10 list information (policies, posting, digest version, archives,
> > > unsubscribing): http://www.tivoli.isis2000.com/lists.html
> > > TME10 Searchable archives: http://www.integrate-u.com
> > > TME10 List FAQ: http://www.concentric.net/~codie/tme10listfaq.html
> >
> > --
> > Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
> > Tel: +44 (0)1628 782565
> > Copyright (c) 1998 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
> > reserved.
>
> --
> Vladimir Petr
> DATASYS
> -----------------------------
--
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 1998 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
|