nv-l
[Top] [All Lists]

Re: NT version 5.1 question

To: nv-l@lists.tivoli.com
Subject: Re: NT version 5.1 question
From: "Frank W. Hansen" <fhansen@ENTERPRISEINNOVATIONS.COM>
Date: Tue, 28 Sep 1999 07:03:18 -0400
Thank you Xu, that corrected one problem but on to another one.  Now trapd
is complaining stating that another process has port 162.  I have checked
the services listening on 162.  No trap or other process is using that port.
Any hints?

Thanks!

----- Original Message -----
From: Xu He <xuhe@YAHOO.COM>
To: <NV-L@UCSBVM.UCSB.EDU>
Sent: Tuesday, September 28, 1999 8:22 AM
Subject: Re: NT version 5.1 question


> The NetView service is initial run under the NetView
> userid in NT.  The ID is normally assigned Administer
> privilage and/or Log On As Service privilege.  Did you
> change the password for the NetView ID?  if you did,
> you have to change it under Control Panel -> Services
> -> Netview.
>
> If someone happens to delete the NetView ID, either
> recreated using usrmgr, or launch the service using
> another ID with the correct privilege.
>
> Hope this helps.
> Xu He
>
>
> --- "Frank W. Hansen"
> <fhansen@ENTERPRISEINNOVATIONS.COM> wrote:
> > Nothing else in the NetView log but in the NT System
> > Log, I receive the following:
> >
> > "The NetView Service service failed to start due to
> > the following error:
> > The service did not start due to a logon failure."
> >
> > Best Regards,
> >
> > Frank W. Hansen
> > Tivoli Enterprise Certified Consultant
> >
> > Enterprise Innovations
> > www.enterpriseinnovations.com
> > 910 458 9172
> >
> >   ----- Original Message -----
> >   From: Vladimir Petr
> >   To: NV-L@UCSBVM.UCSB.EDU
> >   Sent: Tuesday, September 28, 1999 4:52 AM
> >   Subject: Re: NT version 5.1 question
> >
> >
> >   Hi, Frank;
> >   Is there more detailed information in the  NetView
> > Log (accessible from the NetView Start Menu group)?
> > Could be of some help.
> >   Best regards,
> >   Vladimir.
> >
> >   "Frank W. Hansen" wrote:
> >
> >     Greetings.  I am unable to start my NetView
> > daemons on NT.  When I issue the command "ovstart
> > -v" I receive the following error: Error starting
> > NetView service, error=1069OVsPMD not running. Best
> > Regards, Frank W. Hansen
> >     Tivoli Enterprise Certified Consultant
> > Enterprise Innovations
> >     www.enterpriseinnovations.com
> >     910 458 9172
> >
>
>
> =====
> Xu He
> Consulting Services Engineer
> Network Solutions, Inc
> http://www.netsol.com/consulting
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web