The 1720's are newer than the Cisco-Products MIB in 5.1.2. Your best bet
is to get a newer copy of CISCO-PRODUCTS.MIB and load it. I'm not sure
whether or not you'll want the SNMP Ver 1 or Ver 2 of the MIB, though. If
you have CiscoView, the updater for it will also load new MIBs to allow
newer Cisco's to be recognized. We had to do this for 2600's.
--D
Duane Waddle
waddle1@us.ibm.com
"With sufficient thrust, pigs fly just fine..." -- RFC1925
"Paul Sandler" <paul@swebs.com>@tkg.com on 02/12/2001 04:36:13 PM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: "IBM NetView Discussion" <nv-l@tkg.com>
cc:
Subject: Re: [NV-L] Cisco 1720
Do you have the correct Read Community string in your SNMP Config?
You didn't say whether it was discovered as isSNMPsupported=True? You
can see that using right click and select Display Object Information.
Paul
-----Original Message-----
From: jstobby <jstobby@co.el-dorado.ca.us>
To: "nv-l@tkg.com" <nv-l@tkg.com>
Date: Mon, 12 Feb 2001 13:39:02 -0800
Subject: [NV-L] Cisco 1720
> Hi,
> Platform is 5.12 on Aix 4.2. I hope to upgrade this system soon to
> 6.01, but I am learning the system single handed, and it is taking
> time.
> I was wondering if anyone could help with the following problem;
>
> We have a cisco 1720, running OS 12.1(3)T. I cannot get it to be part
> of
> my router collection, nor does it show up in the IP map. It is part
> of
> the Unknown SNMP collection. The vendor is unset, but isrouter is
> True.
>
> I have updated the oid_to_sym registration file with the following;
> sysObject ID 1.3.6.1.4.1.9.1.201
> symbol class : Connector
> symbol type: Gateway
>
> I also updated the oid_to_registration file with the following;
> SNMP object id - 1.3.6.1.4.1.9.1.201
> vendor name: cisco Systems
> Agent type: Cisco 1720
> Topology attribute flags: G(gateway)
>
> Any ideas or help is greatly appreciated.
>
>
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|