What happens when you select it in the Collection submap and delete it?
Does it disappear from the screen? What does it say when you do
'Tools...Display Object Info'? You should see an object number in the
upper left, then you can type, at a commandline, ovobjprint -o xxxx >
save.file
if you want to show us what it says.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
jstobby <jstobby@co.el-dorado.ca.us>@tkg.com on 02/13/2001 12:37:15 PM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject: Re: [NV-L] Cisco 1720
Leslie,
I did the steps you outlined again, after I delete the device it does not
show up in the events. I waited about 5 minutes, then tired to locate it.
Before I deleted it, I looked under Nways protocols and it only said it was
part of the unkSNMP collection. After restarting the map, it still is only
in unkSNMP. It does appear green with the router symbol.
Leslie Clark wrote:
> Judy, you say that it is in the Collection, but it is not in the IP map.
> If that is really true, then the problem may be that it got stuck in the
> Collection, preventing rediscovery. On rediscovery it was supposed
> to get the new attributes due to your oid_to_type and oid_to_sym
> entries. (Getting the vendor field set is what gets it out of the
> Unknown_SNMP Collection. And those fields are ONLY set at
> discovery time.) So make sure of a thorough deletion, and then
> rediscover it like this: (you only have one map, right? the Default?)
>
> ovstop netmon
> Select the node in the Collection
> On the menu bar on top of the map (not the right-mouse context menu),
> Edit...Delete Object...From ALL Submaps
> Wait for the deletion to show up in the events display
> Locate...Object... By Selection Name
> Make sure no more occurrances of that node are found. If they are
> open those submaps and delete them.
> ovtopofix -a
> Make sure the node is in the seedfile
> ovstart
>
> The node should appear in the New Object Holding Area as a router.
> Its object info should show vendor and agent fields set. It should not
> be in the Unknown_SNMP Collection.
>
> On the other hand, when you say it is not on the IP map, you may only
> mean that it is not on the top level, where routers go. Does it appear
> elsewhere (View...Protocols)? Is it generic in appearance (green
> square? Let us know what happens.
>
> Note, no vendor-proprietary mibs are required for Netview to draw
> a router as far as I know. You may want them later for other things,
> though.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
>
> jstobby <jstobby@co.el-dorado.ca.us>@tkg.com on 02/12/2001 04:39:02 PM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> Sent by: owner-nv-l@tkg.com
>
> To: "nv-l@tkg.com" <nv-l@tkg.com>
> cc:
> Subject: [NV-L] Cisco 1720
>
> Hi,
> Platform is 5.12 on Aix 4.2. I hope to upgrade this system soon to
> 6.01, but I am learning the system single handed, and it is taking
> time.
> I was wondering if anyone could help with the following problem;
>
> We have a cisco 1720, running OS 12.1(3)T. I cannot get it to be part of
> my router collection, nor does it show up in the IP map. It is part of
> the Unknown SNMP collection. The vendor is unset, but isrouter is True.
>
> I have updated the oid_to_sym registration file with the following;
> sysObject ID 1.3.6.1.4.1.9.1.201
> symbol class : Connector
> symbol type: Gateway
>
> I also updated the oid_to_registration file with the following;
> SNMP object id - 1.3.6.1.4.1.9.1.201
> vendor name: cisco Systems
> Agent type: Cisco 1720
> Topology attribute flags: G(gateway)
>
> Any ideas or help is greatly appreciated.
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
|