This is a multi-part message in MIME format. The CISCO-PRODUCTS.MIB loaded is dated April 24, 2000 loaded and the
isSNMPSupported is true, the SNMPAgent is unset. I did add an entry in the
SNMP config for this device. Maybe cisco has a newer product mib, I will look
for it. We do not have CiscoView.
Duane Waddle wrote:
> The 1720's are newer than the Cisco-Products MIB in 5.1.2. Your best bet
> is to get a newer copy of CISCO-PRODUCTS.MIB and load it. I'm not sure
> whether or not you'll want the SNMP Ver 1 or Ver 2 of the MIB, though. If
> you have CiscoView, the updater for it will also load new MIBs to allow
> newer Cisco's to be recognized. We had to do this for 2600's.
>
> --D
>
> Duane Waddle
> waddle1@us.ibm.com
> "With sufficient thrust, pigs fly just fine..." -- RFC1925
>
> "Paul Sandler" <paul@swebs.com>@tkg.com on 02/12/2001 04:36:13 PM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> Sent by: owner-nv-l@tkg.com
>
> To: "IBM NetView Discussion" <nv-l@tkg.com>
> cc:
> Subject: Re: [NV-L] Cisco 1720
>
> Do you have the correct Read Community string in your SNMP Config?
> You didn't say whether it was discovered as isSNMPsupported=True? You
> can see that using right click and select Display Object Information.
>
> Paul
>
> -----Original Message-----
> From: jstobby <jstobby@co.el-dorado.ca.us>
> To: "nv-l@tkg.com" <nv-l@tkg.com>
> Date: Mon, 12 Feb 2001 13:39:02 -0800
> Subject: [NV-L] Cisco 1720
>
> > Hi,
> > Platform is 5.12 on Aix 4.2. I hope to upgrade this system soon to
> > 6.01, but I am learning the system single handed, and it is taking
> > time.
> > I was wondering if anyone could help with the following problem;
> >
> > We have a cisco 1720, running OS 12.1(3)T. I cannot get it to be part
> > of
> > my router collection, nor does it show up in the IP map. It is part
> > of
> > the Unknown SNMP collection. The vendor is unset, but isrouter is
> > True.
> >
> > I have updated the oid_to_sym registration file with the following;
> > sysObject ID 1.3.6.1.4.1.9.1.201
> > symbol class : Connector
> > symbol type: Gateway
> >
> > I also updated the oid_to_registration file with the following;
> > SNMP object id - 1.3.6.1.4.1.9.1.201
> > vendor name: cisco Systems
> > Agent type: Cisco 1720
> > Topology attribute flags: G(gateway)
> >
> > Any ideas or help is greatly appreciated.
> >
> >
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
jstobby.vcf
Description: Card for jstobby
|