Thats for NT too
Thanks
-----Mensaje original-----
De: REIBENSCHUH Alfred [mailto:alfred.reibenschuh@it-austria.com]
Enviado el: Jueves, 03 de Mayo de 2001 04:07 p.m.
Para: 'IBM NetView Discussion'
Asunto: RE: [NV-L] SNMPv2
hi!
you can get a converter from:
http://www.ibr.cs.tu-bs.de/projects/libsmi/download.html
its called smidump
mfG. Alfred Reibenschuh
INFORMATIONSTECHNOLOGIE AUSTRIA GMBH
TELEKOMMUNIKATION
Networkmanagement
Intranet Info-koordinator
A-1020 Wien, Lassallestrasse 5
T: ++43-1-21717-58947
F: ++43-1-21717-58979
E: alfred.reibenschuh@it-austria.com
> -----Original Message-----
> From: Pablo Andrés Villegas Florez [mailto:pavillegas@epsa.com.co]
> Sent: Thursday, May 03, 2001 10:32 PM
> To: 'IBM NetView Discussion'
> Subject: RE: [NV-L] SNMPv2
>
>
> Do you know where i can get the converter ?
>
> Thanks in advance
>
>
>
>
>
>
>
> -----Mensaje original-----
> De: James_Shanks@tivoli.com [mailto:James_Shanks@tivoli.com]
> Enviado el: Jueves, 03 de Mayo de 2001 12:24 p.m.
> Para: IBM NetView Discussion
> Asunto: RE: [NV-L] SNMPv2
>
>
>
> What you cannot do is use the GUI to configure snmpcollect
> but there is
> nothing to stop you from configuring \usr\ov\conf\snmpCol.conf by hand
> using notepad.
> If you look at the GUI representation and what's in the file
> you can fairly
> easily figure it out.
> Just make sure that you specify only V1 data types like Gauge and not
> Gauge32 and it should work fine for the most part.
>
> But it may be easier to convert the MIB to V1 and load it first.
> There are appends in this list about public domain MIB
> converters you can
> obtain for free to do that.
>
> James Shanks
> Team Leader, Level 3 Support
> Tivoli NetView for UNIX and NT
>
>
>
> "Paul Maine Jr." <paulm@msicc.com>@tkg.com on 05/03/2001 01:00:51 PM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> Sent by: owner-nv-l@tkg.com
>
>
> To: "'IBM NetView Discussion'" <nv-l@tkg.com>
> cc:
> Subject: RE: [NV-L] SNMPv2
>
>
>
>
> You can only collect SNMPv1 with Netview. You will need to
> convert your
> SNMPv2 MIB to SNMPv1. Are you using the RapidCity Nortel MIB?
>
> Paul
> -----Original Message-----
> From: Pablo Andrés Villegas Florez [mailto:pavillegas@epsa.com.co]
> Sent: Thursday, May 03, 2001 11:51 AM
> To: IBM NetView Discussion (E-mail)
> Subject: [NV-L] SNMPv2
>
>
> Hi,
>
> I have Netview 6.01 on NT, anyone knows how I can collect
> mibs variables
> SNMPv2 on the collect data opcion of the netview, I already do so but
> only permit collect SNMPv1, I need collect mib variables
> SNMPv2 because the
> manufacturer (nortel) doens´t provide mibs SNMPv1.
>
>
>
> Thanks in advance
>
>
> Pablo A. Villegas
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> ___________
> NV-L List information and Archives: http://www.tkg.com/nv-l
> ______________________________________________________________
> ___________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
|