Sandro,
Yes, you can setup MLM to montior MIB values and define thresholds on those
values. You have three choices on defining the MLM. Since you are
working with isolated networks, one of the ways, Agent Policy Manager part
of NetView will not work since you don't have SNMP access between MLM and
NetView.
How will you have the MLM report status back to the main NetView server?
MLM is an SNMP application that is an extension of NetView. MLM sends
status with SNMP traps.
How will you configure the MLM? NetView can send information to the MLM,
but again, that is with SNMP. You could configure a local MLM...then
FTP the configuration file to the isolated MLM, but that is something that
will take some planning and testing. If your MLM is on Unix, you could
install the MLM configuration item on the MLM itself.
Good luck, you have a bit of work in front of you.
Stephen Hochstetler shochste@us.ibm.com
International Technical Support Organization at IBM
Office - 512-838-6198 (t/l 678) FAX - 512-838-6931
http://www.redbooks.ibm.com
|---------+---------------------------->
| | "Seminara, |
| | Sandro" |
| | <SSeminara@fnis.c|
| | om> |
| | Sent by: |
| | owner-nv-l@lists.|
| | us.ibm.com |
| | |
| | |
| | 12/08/2003 01:31 |
| | PM |
| | Please respond to|
| | nv-l |
|---------+---------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: nv-l@lists.tivoli.com
|
| cc:
|
| Subject: [nv-l] SNMP Polling via a MLM
|
>------------------------------------------------------------------------------------------------------------------------------|
We have a main Netview server, but recently acquired 6 "isolated" networks
that have devices which need to be SNMP Polled.
For security reasons we can not open ICMP, SNMP, and SNMPTrap between our
main network and each device in these 6 isolated networks.
Or solution is to put 6 MLM's, one in each isolated network, and have them
directly poll each device and then report that status back to our main
NetView server.
The question is as such.... Can MLM's poll devices with SNMP or are they
limited to ICMP?
We are running NetView 7.1.3 (FP01) on AIX.
Thank you,
Sandro Seminara
|