|
In
order for location.conf to automatically place the router ALL subnets present on
the device must be in location.conf container. If you have a router with 5
interfaces say in 4 different subnets (lets assume you have a pair of serial
links to another location that are in the same subnet). all 4 of those subnets
must be in location.conf container for that physical site. If you miss one
subnet in location.conf the icon will float back to the ip internet
map.
Correct.
However using a fairly specific Location.conf file. That device with the
same name and ip addresses which shows up correctly in the submap that it
should, also keeps showing up on the main IP Internet map. Now if you
are saying that because this device has multiple IP addresses that it will
show up wherever that network segment is, then I can understand that and
remedy that.
|
|
| "Bernard Disselborg"
<BDisselborg@triple-p.nl>
Sent by: owner-nv-l@lists.us.ibm.com
02/23/2004 10:24 AM
Please respond to nv-l
|
To:
<nv-l@lists.us.ibm.com>
cc:
Subject: Re: [nv-l] Same
device multiple times |
Chris,
NetView places a device on the IP
Internet submap, when a device has
multiple IP addresses in different IP
subnets.
HTH
Bernard
>>> cjp8@meadwestvaco.com
23-02-2004 15:43:57 >>>
Me again,
Q1: Why does
entview continually find teh same device multiple times?
I
have a
device that is already in one submap but it keeps finding it
again
and
placing it ont he IP Internet map. I have deleted it from that
submap, I have ran ovtopofix and ovmapcount and even after I delete
it
once it is polling time again it just finds it again and places it
back
on
the map again?
Anyone?
-Chris
Petrina
________________________________________________________________________
This
email has been scanned for all viruses by the MessageLabs
SkyScan
service._______________________________________________________________
Note:
Please update your email address for this user to
reflect
MeadWestvaco Corporation. MeadWestvaco employee email
addresses
are in the format of user@MeadWestvaco.com
This
electronic message contains information from MeadWestvaco
Corporation or
subsidiary companies, which may be confidential,
privileged or otherwise
protected from disclosure. The
information is intended to be used
solely by the recipient(s)
named. If you are not an intended
recipient, be aware that
any review, disclosure, copying, distribution or
use of this
transmission or its contents is prohibited. If you
have
received this transmission in error, please notify
MeadWestvaco
immediately at
postmaster@MeadWestvaco.com.
_______________________________________________________________________
________________________________________________________________________
This
email has been scanned for all viruses by the MessageLabs
SkyScan
service._______________________________________________________________
|