Glen/Leslie,
You are correct initially it is filled in
with the hostname of my workstation. That was my first though also.
I have changed it to the hostname and then to the IP of the NV server just to
make sure. In the error message the real “hostname” or IP,
whichever I put in the hostname field of the log on screen, is in the place of
hostname below. If by installing the web console client you mean
installing from the /usr/OV/www/wwwroot/download/nvwinstall.exe that is what I
have installed now. I did get the installer after I upgraded to FP3 so
the versions should be good. I appreciate your help.
Thanks
Ronnie Gill
Network Operations
DOIM
Fort Carson, CO
719-526-1674
From: owner-nv-l@lists.us.ibm.com
[mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of Leslie Clark
Sent: Wednesday, May 18, 2005 9:34
PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Web Console
This may be a dumb question, but what exactly does the
string 'Cannot connect to the Web
Server at hostname:8080' say? Does it perhaps say,
instead of hostname, the name of our PC? Every single customer that I have
walked through this has neglected to specify the name of the Netview server in
that authentication box. When first installed, it is filled with the name of
your PC. Just thought I'd ask.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager
|
"Glen Warn"
<Glen.Warn@pemcocorp.com>
Sent
by: owner-nv-l@lists.us.ibm.com
05/18/2005 08:20 PM
|
|
To
|
<nv-l@lists.us.ibm.com>
|
|
cc
|
|
|
Subject
|
RE: [nv-l] Web Console
|
|
I've had the same problem and my work around was
to install the web console client. Doing so allowed me to work fine -
just that it was outside of my standard browser. Be aware though, I think
there are specific versions of this client that should be sync'd with the
version of the fixpack you are running.
Good luck,
Glen
Warn
PEMCO
Corporation Computer Services (PCCS)
glen.warn@pemcocorp.com
206-628-5770
From:
owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Gill, Ronnie E CIV USA
DOIM/SMB
Sent: Wednesday, May 18, 2005 1:44 PM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] Web Console
List,
I am relatively new to NetView and am having trouble getting
the Web Console to work. We are using NV 7.1.4 FP3 on a Solaris 9 O/S.
I go through the Server Setup and enable all of the Web Console Daemons
as well as set up users in the Configure Web Console Security area. I
then install the client on a WinXP workstation and try to connect.
Needless to say the connection fails with the following error:
Cannot connect to the Web Server at hostname:8080
Contact the administrator.
I run a “ps –ef | grep jetty.sh” and
receive the following information:
root 9671 7618 0 May 16 ?
0:00 /usr/OV/service/spmsur -w 15 /usr/OV/www/bin/jetty.sh
I have looked in the documentation as well as searched the
list archives and cannot find anything that I’m doing incorrectly.
Anyone out there have any ideas as to what my problem could be?
Thanks
Ronnie Gill
Network Operations
DOIM
Fort Carson, CO
719-526-1674
Walla! Mail - get your free mail today