|
Hi
Glen,
Aren't you using the default URL for
Applet.
Please
also do the following in your Internet Explorer "LAN Settings" in the Proxy
Settings Exceptions. In the area "Do not use proxy server for addresses
beginning with xxx.xxx.* (where xxx.xxx are the two octets of your
NV6KHost)".
Best
Regards
Siraj
Hi Leslie,
HTTP ERROR: 404 Not
Found
Could not find
resource for /NetViewApplet
RequestURI=/NetViewApplet
I've tried NetviewApplet.htm and .html too but with no
luck. I suspect it's my URL that's the problem.
If I run the web console
app from the same machine it works fine. I've tried it on 2 other
machines with similar results too. I do have a proxy server and have
tried setting up the bypass proxy and temporarily disabling the proxy.
If you have any other ideas, I'd like the flexibility of running it without
installing addtional software.
I can connect to the jetty config page if I use this URL
http://NV6KHostName:8080
Please let me know,
Glen Warn
PEMCO Corporation Computer Services
(PCCS)
206-628-5770
This may be a dumb question, but
what exactly does the string 'Cannot connect to the Web Server at hostname:8080' say? Does it perhaps say, instead of hostname, the
name of our PC? Every single customer that I have walked through this has
neglected to specify the name of the Netview server in that authentication
box. When first installed, it is filled with the name of your PC. Just
thought I'd ask.
Cordially,
Leslie A. Clark
IBM Global Services - Systems
Mgmt & Networking
(248) 552-4968 Voicemail, Fax,
Pager
"Glen Warn"
<Glen.Warn@pemcocorp.com>
Sent by: owner-nv-l@lists.us.ibm.com
05/18/2005 08:20 PM
|
|
To
| <nv-l@lists.us.ibm.com>
|
|
cc
|
|
|
Subject
| RE: [nv-l] Web
Console |
|
I've had the same problem and my work around was
to install the web console client. Doing so allowed me to work fine -
just that it was outside of my standard browser. Be aware though, I
think there are specific versions of this client that should be sync'd with
the version of the fixpack you are running.
Good luck,
Glen Warn
PEMCO Corporation Computer Services (PCCS)
glen.warn@pemcocorp.com
206-628-5770
From: owner-nv-l@lists.us.ibm.com
[mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Gill, Ronnie E CIV
USA DOIM/SMB
Sent: Wednesday, May 18, 2005 1:44 PM
To:
nv-l@lists.us.ibm.com
Subject: [nv-l] Web Console
List,
I am relatively new to NetView and am having
trouble getting the Web Console to work. We are using NV 7.1.4 FP3 on a
Solaris 9 O/S. I go through the Server Setup and enable all of the Web
Console Daemons as well as set up users in the Configure Web Console Security
area. I then install the client on a WinXP workstation and try to
connect. Needless to say the connection fails with the following
error:
Cannot connect to the Web Server at
hostname:8080
Contact the
administrator.
I run a "ps -ef | grep jetty.sh" and
receive the following information:
root 9671
7618 0 May 16 ? 0:00
/usr/OV/service/spmsur -w 15 /usr/OV/www/bin/jetty.sh
I
have looked in the documentation as well as searched the list archives and
cannot find anything that I'm doing incorrectly. Anyone out there have
any ideas as to what my problem could be?
Thanks
Ronnie Gill
Network Operations
DOIM
Fort Carson, CO
719-526-1674
Walla! Mail - get your free mail today
|