HI- So, if each NIC interface has a different ip address, how does NEtview
know that those addresses are from the same physical server ?? Each
interface
is on it's own separate LAN segment, allowing for a segment to fail, and
still
allow backup routes to get to the server around the failure.
thanks + see ya
Jim
-----Original Message-----
From: Mythili Kannan [mailto:mythili@anytech-inc.com]
Sent: Wednesday, June 14, 2000 11:05 AM
To: IBM NetView Discussion
Subject: Re: [NV-L] Ruleset Approach for Quad NIC
Jim:
I do not think you need to use ruleset for this. If you have multiple NICs
on a box and if you manage all these interfaces with NetView, you will get
Node Down event only when all interfaces (ie., all NICs) are down.
- Regards, Mythili
At 09:14 AM 6/14/00 -0400, you wrote:
>I only want to generate a node down if NIC1 AND NIC2 AND NIC3 AND NIC4 are
>all
>down. Can someone tell me if this do-able with a ruleset ? Each NIC
>interface will have
>a different ip address.
>
>thanks
>
>Jim Mapp
>Dimension Enterprises,Inc
>A Nortel Networks' Global Professional Services Company
>703-712-8529
>
>
>_________________________________________________________________________
>NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
**********************************************************************
Mythili Kannan
AnyTech Inc
14433 Settlers Landing Way
N.Potomac, MD 20878
Phone/Fax: (301) - 738 - 2419
Cell : (202) - 607 - 4810
URL :<http://www.anytech-inc.com>
**********************************************************************
|