nv-l
[Top] [All Lists]

RE: Ruleset Approach for Quad NIC

To: nv-l@lists.tivoli.com
Subject: RE: Ruleset Approach for Quad NIC
From: lclark@us.ibm.com
Date: Wed, 14 Jun 2000 21:03:35 -0400

What's probably confusing  Mr. Mapp is that the server probably does not
have
IP forwarding enabled, so the node shows up in 4 separate subnets but not
on the
top level map as it would if it were a router. But the behavior should be
the same.
If all 4 interfaces are down, you should get a Node Down event.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
---------------------- Forwarded by Leslie Clark/Southfield/IBM on
06/14/2000 09:01 PM ---------------------------

James_Shanks@TIVOLI.COM@tkg.com on 06/14/2000 01:06:42 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject:  RE: [NV-L] Ruleset Approach for Quad NIC





The same way that NetView knows that any two distinct IP addresses are on
the
same physical server -- through SNMP.  Every SNMP agent maintains an
interface
tables and that is one of the main things that NetView queries in each
device
after it is discovered.  It is fundamental that your servers have SNMP
installed
and working, else NetView will not manage them very well.

This dovetails with the questions Ray asked.  What do your NIC servers look
like?  Pick one off the map, right click on it, pick "Tools" then "Display
Object Information", and see many interfaces it has in the TopM Interface
Count.
The TopM Interface List tells what they are.     Are you managing all of
them or
just the ones with NIC?

James Shanks
Tivoli (NetView for UNIX and NT) L3 Support


"James H. Mapp" <jhmapp@dimension.net> on 06/14/2000 12:22:47 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

To:   IBM NetView Discussion <nv-l@tkg.com>
cc:    (bcc: James Shanks/Tivoli Systems)
Subject:  RE: [NV-L] Ruleset Approach for Quad NIC




HI- So, if each NIC interface has a different ip address, how does NEtview
know that those addresses are from the same physical server ?? Each
interface
is on it's own separate LAN segment, allowing for a segment to fail, and
still
allow backup routes to get to the server around the failure.

thanks + see ya
Jim

-----Original Message-----
From: Mythili Kannan [mailto:mythili@anytech-inc.com]
Sent: Wednesday, June 14, 2000 11:05 AM
To: IBM NetView Discussion
Subject: Re: [NV-L] Ruleset Approach for Quad NIC


Jim:
I do not think you need to use ruleset for this.  If you have multiple NICs
on a box and if you manage all these interfaces with NetView, you will get
Node Down event only when all interfaces (ie., all NICs) are down.

- Regards, Mythili

At 09:14 AM 6/14/00 -0400, you wrote:
>I only want to generate a node down if NIC1 AND NIC2 AND NIC3 AND NIC4 are
>all
>down. Can someone tell me if this do-able with a ruleset ? Each NIC
>interface will have
>a different ip address.
>
>thanks
>
>Jim Mapp
>Dimension Enterprises,Inc
>A Nortel Networks' Global Professional Services Company
>703-712-8529
>
>
>_________________________________________________________________________
>NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
**********************************************************************
Mythili Kannan
AnyTech Inc
14433 Settlers Landing Way
N.Potomac, MD 20878
Phone/Fax: (301) - 738 - 2419
Cell : (202) - 607 - 4810
URL     :<http://www.anytech-inc.com>
**********************************************************************

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l



_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web