How do you enable "Global Acknowledge Mode"??
-----Original Message-----
From: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]On Behalf Of
Ingersoll, Robert
Sent: Tuesday, November 27, 2001 2:50 PM
To: 'IBM NetView Discussion'
Subject: RE: [NV-L] Acknowledging
As designed at 5.1.3. Upgrade to 6.0.2 or better and use global Acknowledge
mode. It will do what you want.
--
Bob Ingersoll
USAA Information Technology Company (ITCO)
-----Original Message-----
From: Allison, Jason (JALLISON) [mailto:JALLISON@arinc.com]
Sent: Tuesday, November 27, 2001 1:34 PM
To: 'nv-l@tkg.com'
Subject: [NV-L] Acknowledging
AIX 4.3.3 - Netview 5.1.3
We are now instructing our operators to acknowledge container symbols when
there is a failure that is known. This works fine when we have one instance
of 'netview' running. Acknowledging works as expected. We have come across
some problems when bringing up another instance of 'netview' (TME10 GUI).
The background is we have a second AIX box that will remotely shell into the
first box already running an instance of 'netview'. We will bring up this
second instance of TME10 as a read-only map, which has worked fine for some
time. Our problem is that the second instance of the map does not seems to
synchronize the currently acknowledged containers, nor if I acknowledge a
container while both are up do they then sync.
My question(s) are:
- Is this 'as designed'?
- If so, why? Pros/Cons. Why is this desirable?
- Can both maps be synced up?
- What are my options?
Hopefully I am not missing any information,
Thanks for your time,
Jason Allison
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
|