nv-l
[Top] [All Lists]

Re: [nv-l] netview name lookup

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] netview name lookup
From: Leslie Clark <lclark@us.ibm.com>
Date: Mon, 22 Dec 2003 10:13:48 -0500
Delivery-date: Mon, 22 Dec 2003 15:19:33 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com

As far as AIX not being able to use /etc/hosts, I don't think that is true. Many of us have successfully used /etc/hosts to override DNS by adding the file /etc/netsvc.conf with the entry 'hosts=local,bind' to cause AIX to check first the /etc/hosts file, then check whatever DNS is specified in /etc/resolv.conf. Did I misunderstand?

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



"Christopher J Petrina" <cjp8@meadwestvaco.com>
Sent by: owner-nv-l@lists.us.ibm.com

12/22/2003 09:29 AM
Please respond to nv-l

       
        To:        nv-l@lists.us.ibm.com
        cc:        
        Subject:        Re: [nv-l] netview name lookup




This is how I would figure it did the Name resolution.  HOwever with Netview running on an AIX box, my UNIX guru's have come to tell me that name resolution is only done via a DNS server from AIX.  AIX cannot be configured to use the /etc/hosts file for resolution.   We ahve a DNS server that it attaches to.   And your answer is what I was looking for


Thank you

Chris Petrina


Jane Curry <jane.curry@skills-1st.co.uk>
Sent by: owner-nv-l@lists.us.ibm.com

12/20/2003 06:57 AM
Please respond to nv-l

       
       To:        nv-l@lists.us.ibm.com

       cc:        

       Subject:        Re: [nv-l] netview name lookup




NetView himself has no name-to-address resolution mechanism - he uses
whatever the host Operating System uses.  That is, if all you have is a
hosts file with the NetView box in it, everything else will have IP
addresses as labels.  It is strongly recommended that you have a
reliable DNS employed by the NetView system (preferably with the NetView
system acting as a caching / secondary DNS server).

Cheers,
Jane

Christopher J Petrina wrote:

>
> how does netview look attempt to determine the name of a device.
> i.e. in my location.conf file I am using names in place of IP
> addresses for my gateways.  How does Netview resolve the name on a AIX
> box?


--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2003 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights reserved.



________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________




<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web