nv-l
[Top] [All Lists]

Re: [nv-l] netview name lookup

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] netview name lookup
From: Leslie Clark <lclark@us.ibm.com>
Date: Mon, 22 Dec 2003 10:09:12 -0500
Delivery-date: Mon, 22 Dec 2003 15:14:07 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com

A common area of confusion with the location.conf file gateway entries: you cannot put just any old address in there. The match will be done on the Selection Name that the router ends up with.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



"Christopher J Petrina" <cjp8@meadwestvaco.com>
Sent by: owner-nv-l@lists.us.ibm.com

12/22/2003 09:29 AM
Please respond to nv-l

       
        To:        nv-l@lists.us.ibm.com
        cc:        
        Subject:        Re: [nv-l] netview name lookup




This is how I would figure it did the Name resolution.  HOwever with Netview running on an AIX box, my UNIX guru's have come to tell me that name resolution is only done via a DNS server from AIX.  AIX cannot be configured to use the /etc/hosts file for resolution.   We ahve a DNS server that it attaches to.   And your answer is what I was looking for


Thank you

Chris Petrina


Jane Curry <jane.curry@skills-1st.co.uk>
Sent by: owner-nv-l@lists.us.ibm.com

12/20/2003 06:57 AM
Please respond to nv-l

       
       To:        nv-l@lists.us.ibm.com

       cc:        

       Subject:        Re: [nv-l] netview name lookup




NetView himself has no name-to-address resolution mechanism - he uses
whatever the host Operating System uses.  That is, if all you have is a
hosts file with the NetView box in it, everything else will have IP
addresses as labels.  It is strongly recommended that you have a
reliable DNS employed by the NetView system (preferably with the NetView
system acting as a caching / secondary DNS server).

Cheers,
Jane

Christopher J Petrina wrote:

>
> how does netview look attempt to determine the name of a device.
> i.e. in my location.conf file I am using names in place of IP
> addresses for my gateways.  How does Netview resolve the name on a AIX
> box?


--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2003 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights reserved.



________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________




<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web