nv-l
[Top] [All Lists]

RE: [nv-l] locations

To: <nv-l@lists.us.ibm.com>
Subject: RE: [nv-l] locations
From: "Barr, Scott" <Scott_Barr@csgsystems.com>
Date: Wed, 14 Apr 2004 08:18:58 -0500
Delivery-date: Wed, 14 Apr 2004 14:30:48 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Thread-index: AcQhh4cuM6/19h9pQv+8XKcImgLwewAm31BQ
Thread-topic: [nv-l] locations
I guarantee it is the PERL level.
 
I have no explanation other than I had the same issue and the author assured me using a current version of PERL would resolve it (which it did).


From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Leslie Clark
Sent: Tuesday, April 13, 2004 1:40 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] locations


Yes, you can do it without rediscovery, but you must make a new map, as in 'File..New Map'.  Without efixes on 7.1.4 there are some problems with this. Get the efix for APAR IY48698.  In fact you ought to call Support and ask for the latest recommended efixes. I hear they are getting close to the first fixpack for 7.1.4, so there are  a few good ones you might want to put on.

And even without a new map, nodes and networks that are discovered later will be placed according to the location.conf that was in place when you started the Netview interface.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



Marcos Antonio Pezzutti Filho <pezzutti@banespa.com.br>
Sent by: owner-nv-l@lists.us.ibm.com

04/10/2004 03:49 PM
Please respond to
nv-l

To
"'nv-l@lists.us.ibm.com'" <nv-l@lists.us.ibm.com>
cc
Subject
RE: [nv-l] locations





Hi Mario,
 
You can modify the file and stop and restart netview.
Then all new nodes and routers are put on the designated location.
 
Marcos Pezzutti
-----Original Message-----
From:
Mario Behring [mailto:mariobehring@yahoo.com]
Sent:
Saturday, April 10, 2004 1:44 PM
To:
nv-l@lists.us.ibm.com
Subject:
[nv-l] locations

Hi list,
 
Can I configure a location.conf file in a NV 7.1.4 running on a AIX box after the initial discovery (a production box) ? I mean, will NV put each discovered objet in its appropriate location container ? Or this can be done only at the initial discovery ?
 
Thanks.
 
Mario Behring
Tivoli Certified Consultant
IBM Brazil
55 19 2104-3006
55 11 8125-5598
mariob@br.ibm.com
mariobehring@yahoo.com
 


Do you Yahoo!?
Yahoo! Tax Center -
File online by April 15th

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web