Hello again list,
Solved my initial
problem, I had removed the line netviewd:/usr/OV.....
from the netviewd.lrf.
If I register netviewd.lrf with the following in the file I get problems
loading Netview, the process just seems to sit there
and I cannot open a GUI. When I try to connect using the webconsole
I get no maps open.
Netviewd.lrf as
follows
netviewd:/usr/OV/bin/netviewd:
OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd
ovactiond nvcorrd actionsvr nvserverd:-spmd 2,
-ro:OVs_WELL_BEHAVED:30:
When I look in ovsuf I see the following.
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd
pmd ovwdb trapd ovtopmd ovactiond
nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:::
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd
pmd ovwdb trapd ovtopmd ovactiond
nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:::
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd
pmd ovwdb trapd ovtopmd ovactiond
nvcorrd actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:::
Any suggestions would be
appreciate, should I remove the additional lines in ovsuf??
Regards
Peter
-----Original
Message-----
From: Ingleson Peter GB
Sent: 19
April 2004 10:56
To: nv-l@lists.us.ibm.com
Subject: [nv-l] netviewd.lrf
problems
Hello List,
I've been
trying to add the -ro flag to my netviewd.lrf file so my webconsole map runs as
read only, however I kept receiving the error below. I removed the -ro from the
file and still I receive this error. Any suggestions on where to look would be
appreciated.
[gl02]:/usr/OV/lrf#sudo
ovdelobj netviewd.lrf
ovdelobj -
Static Registration Utility
ERROR: Invalid value in LRF record #1, Quality
Of Service field. (OVs 1-13)
My
netviewd.lrf contains
OVs_YES_START:nvsecd
pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd
2:OVs_WELL_BEHAVED:30:
Running on AIX
5.1 ML5 NV 7.1.3
Regards
Peter
------------------------------------------------------------------------------------------------------------
This message is intended for the addressee or its
representative only.
Any form of unauthorized use, publication,
reproduction, copying or
disclosure of the content of this e-mail is not
permitted. If you are
not the intended recipient of this e-mail message
and its contents,
please notify the sender immediately and delete this
message and
all its attachments subsequently.