Peter,
Can you do a "snmpwalk <hostname>".
There are several things that trouble me:
1) map not starting
2) Unable to run ovcommand(ovstatus in this case).
Only one ov command can run at any one time, so if
you have an ovstart still running(possibly hanging)
that would keep the ovstatus from running.
Check for any running ov(status, start, stop) commands
that may be running. If you find them, I would suggest
killing them(-9 if need be), then stopping all the daemons
(ovstop nvsecd) and restarting them with netnmrc. Once
that completes, check for any ovcommands running. If there
are none, try an ovstatus. It should work.
Paul
Peter.Ingleson@atradius.com wrote:
Thanks for the tip, I've removed the entries with 1 infront from ovsuf.
Snmpwalk localhost works correctly I get a mass of data scrolling up the
screen. When netviewd was not registered I was able to open a map, but when
I register netviewd I'm not able to open a map. I did the following to add
netviewd with a read only map.
I've added netviewd.lrf with the -ro flag. The following occurs.
[gl02]:/usr/OV/lrf#sudo ovaddobj netviewd.lrf
ovaddobj - Static Registration Utility
Successful Completion
[gl02]:/usr/OV/lrf#sudo ovstart netviewd
ovstart: unable to receive status message from ovspmd: Connection timed out
[gl02]:/usr/OV/lrf#ps -ef | grep ovspmd
gbping1 54912 67898 0 14:11:54 pts/18 0:00 grep ovspmd
root 97282 1 0 11:21:45 - 0:00 /usr/OV/bin/ovspmd
[gl02]:/usr/OV/lrf#ps -ef | grep netviewd
root 50008 97282 0 13:57:17 - 0:00 /usr/OV/bin/netviewd
-display gl02:2 -ro
[gl02]:/usr/OV/lrf#ovstatus netviewd
I'm not able to issue an ovstatus either.
Thanks
Peter
-----Original Message-----
From: Paul [mailto:pstroud@bellsouth.net]
Sent: 19 April 2004 14:18
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] netviewd.lrf problems
Peter,
If the line does not start with a 0: then in is an inactive
entry and can be removed(serversetup has a way to do
this). That being said, removing that last line 1:whatever
should not have made any difference at all.
Are all the daemons starting OK, including netviewd?
Can you do "snmpwalk localhost"?
The map not starting sounds like you are unable to reach
your snmp daemon on the NetView server. Check the above
and let us know your results.
Paul
Peter.Ingleson@atradius.com wrote:
Hello again list,
Solved my initial problem, I had removed the line
netviewd:/usr/OV..... from the netviewd.lrf.
If I register netviewd.lrf with the following in the file I get
problems loading Netview, the process just seems to sit there and I
cannot open a GUI. When I try to connect using the webconsole I get no
maps open.
Netviewd.lrf as follows
netviewd:/usr/OV/bin/netviewd:
OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd
actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:
When I look in ovsuf I see the following.
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd
ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd
2:OVs_WELL_BEHAVED:30:::
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd
ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd
2:OVs_WELL_BEHAVED:30:::
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd
ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2,
-ro:OVs_WELL_BEHAVED:30:::
Any suggestions would be appreciate, should I remove the additional
lines in ovsuf??
Regards
Peter
-----Original Message-----
*From:* Ingleson Peter GB
*Sent**:* 19 April 2004 10:56
*To:* nv-l@lists.us.ibm.com
*Subject:* [nv-l] netviewd.lrf problems
Hello List,
I've been trying to add the -ro flag to my netviewd.lrf file so my
webconsole map runs as read only, however I kept receiving the error
below. I removed the -ro from the file and still I receive this error.
Any suggestions on where to look would be appreciated.
[gl02]:/usr/OV/lrf#sudo ovdelobj netviewd.lrf
ovdelobj - Static Registration Utility
ERROR: Invalid value in LRF record #1, Quality Of Service field. (OVs
1-13)
My netviewd.lrf contains
OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd
actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:
Running on AIX 5.1 ML5 NV 7.1.3
Regards
Peter
|---------------------------------------------------------------------------
---------------------------------|
|This message is intended for the addressee or its representative only. |
|Any form of unauthorized use, publication, reproduction, copying or |
|disclosure of the content of this e-mail is not permitted. If you are |
|not the intended recipient of this e-mail message and its contents, |
|please notify the sender immediately and delete this message and |
|all its attachments subsequently.|
----------------------------------------------------------------------------
--------------------------------
This message is intended for the addressee or its representative only.
Any form of unauthorized use, publication, reproduction, copying or
disclosure of the content of this e-mail is not permitted. If you are
not the intended recipient of this e-mail message and its contents,
please notify the sender immediately and delete this message and
all its attachments subsequently.
|