RE: [nv-l] netviewd.lrf problems

[James Shanks <jshanks@us.ibm.com>]

The entries with a "1" as
the initial character are effectively commented out.
ovspmd only pays attention to those
with the initial "0".
You can delete the others manually if
you like.  There is also an option in serversetup/smitty to do it
for you.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group

Peter.Ingleson@atradius.com
Sent by: owner-nv-l@lists.us.ibm.com

04/19/2004 08:38 AM

Please respond to
nv-l

To	nv-l@lists.us.ibm.com
cc
Subject	RE: [nv-l] netviewd.lrf problems

Hello again list,

 

Solved my initial problem, I had removed the line netviewd:/usr/OV..... from the netviewd.lrf.

 

If I register netviewd.lrf with the following in the file I get problems loading Netview, the process just seems to sit there and I cannot open a GUI. When I try to connect using the webconsole I get no maps open.

 

Netviewd.lrf as follows

 

netviewd:/usr/OV/bin/netviewd:

OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:

 

When I look in ovsuf I see the following.

 

1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:::

1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:::

1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:::

 

Any suggestions would be appreciate, should I remove the additional lines in ovsuf??

 

Regards

Peter

 

-----Original Message-----
From: Ingleson Peter GB
Sent: 19 April 2004 10:56
To: nv-l@lists.us.ibm.com
Subject: [nv-l] netviewd.lrf problems

 

Hello List,

 

I've been trying to add the -ro flag to my netviewd.lrf file so my webconsole map runs as read only, however I kept receiving the error below. I removed the -ro from the file and still I receive this error. Any suggestions on where to look would be appreciated.

 

[gl02]:/usr/OV/lrf#sudo ovdelobj netviewd.lrf

ovdelobj - Static Registration Utility

ERROR:  Invalid value in LRF record #1, Quality Of Service field. (OVs 1-13)

 

My netviewd.lrf contains

 

OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:

 

Running on AIX 5.1 ML5  NV 7.1.3

 

Regards

Peter

------------------------------------------------------------------------------------------------------------
This message is intended for the addressee or its representative only.
Any form of unauthorized use, publication, reproduction, copying or
disclosure of the content of this e-mail is not permitted. If you are
not the intended recipient of this e-mail message and its contents,
please notify the sender immediately and delete this message and
all its attachments subsequently.