nv-l
[Top] [All Lists]

Re: [nv-l] Trying to upgrade to 7.1.4

To: nv-l@lists.us.ibm.com, nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Trying to upgrade to 7.1.4
From: "Ray Westphal" <westphal2002@charter.net>
Date: Tue, 21 Oct 2003 10:16:33 -0400
Delivery-date: Tue, 21 Oct 2003 15:22:58 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <OFAA53521D.3253AF2A-ON87256DC6.004D9CEB-85256DC6.004DBD0F@us.ibm.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l-digest@lists.us.ibm.com
On Tue, 21 Oct 2003 10:09:05 -0400
 James Shanks <jshanks@us.ibm.com> wrote:
Ray -

I don't want to jinx this, but I would not recommend that you jump into the middle of the install process and start running your own commands. The way they test this in Verification is just to start it and let it run.


Yeah - that is the way I normally proceed. But I've attempted this install 6 times. =)

Thanks.

Ray Westphal


James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group




"Ray Westphal" <westphal2002@charter.net>
Sent by: owner-nv-l-digest@lists.us.ibm.com
10/21/2003 09:52 AM
Please respond to nv-l

To: nv-l@lists.us.ibm.com, nv-l@lists.us.ibm.com cc: Subject: Re: [nv-l] Trying to upgrade to 7.1.4



On Tue, 21 Oct 2003 09:43:57 -0400
  James Shanks <jshanks@us.ibm.com> wrote:
Looks like the major error is that actionsvr won't start. Make sure there are no old copies of him still running, which would prevent the new one from getting his socket. If you have rulesets in ESE.automation, rename that file to something else until the install is over.


James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group


Thanks for the quick reply James.

I actually was tailing the file during the installation and as soon as the actionsvr error occurred, I ran nvstat. Nothing was running. I was able to start actionsvr (and nvsecd) manually. I also commented the rulesets in the ESE.automation file before this installation attempt. I'm going to try again in a moment with your suggestion to rename the file.
Ray Westphal
Enterprise Rent-A-Car



"Westphal, Raymond W" <Raymond.W.Westphal@erac.com>
Sent by: owner-nv-l-digest@lists.us.ibm.com
10/21/2003 09:17 AM
Please respond to nv-l


        To:     <nv-l@lists.us.ibm.com>
cc: Subject: [nv-l] Trying to upgrade to 7.1.4



Hello Everyone.

NV 7.1.3 on AIX 5.2 - I'm trying to upgrade to 7.1.4 via the Framework installation method. The install gets to nearly the end and then fails with errors. You can actually start most of the daemons except nvlockd. nvlockd fails because the /etc/services does not have any NetView services anymore. I run all the checks before installation and I have even increased my NetView file system sizes to maximum possible size but I still get the following error:

Something went wrong:
Media Packet:  "/cdrom/FILE33.PKT"
tnvlab01:FAILED (soft error) .......

Here are the last few lines of the the /tmp/update.log:
* Running customize script for fileset OVXMPAPI-MAN.
       *   Making links....
       * Running customize script for fileset IBMVA-RUN.
NOTE:    Installing new version of /usr/OV/bin/netview
         Old version in /usr/OV/bin/#netview
Waiting on SNMP Agent to become operational. 0513-029 The snmpd Subsystem is already active.
Multiple instances are not supported.
NOTE:    Starting trapgend
NOTE:    Starting mgragentd
NOTE:    Starting ovactiond
NOTE:    Starting nvcorrd
NOTE:    Starting nvpagerd
NOTE:    Starting actionsvr
 object manager name: actionsvr
 behavior:            OVs_WELL_BEHAVED
 state:               NOT_RUNNING
 PID:                 24900
last message: exit status: exit(255)

customize:    Failure performing ovstart of actionsvr
ERR_0041_161
ERR_0041_161
+ dspmsg -s 5 nv6000.cat 9999 customize: Failing customize with exit code %s\n 2
+ 1>> /tmp/update.log
customize:    Failing customize with exit code 2
ERROR: Customize script for fileset IBMVA-RUN exited with code 2.
ERR_cfgbf_001
nvconfigbf: Failing doing configuration with exit code 2 base: Failure running script or command '/usr/OV/install/tools/nvconfigbf'
ERR_bcfg_210
base:    Failing base.config with exit code 2
I'd appreciate any suggestions, ideas or best wishes.
Thanks in advance.
Ray Westphal
Enterprise Rent-A-Car






<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web